
The AirTAC SE63 Standard Cylinder SE63X50SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 50mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X50SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Built with a square extruded aluminum barrel that entirely eliminates external tie rods, it offers a compact, corrosion-resistant footprint that mounts flush against machine frames.
This specific configuration includes a CA single clevis mounting interface for pivoting applications and a built-in magnet (-S) compatible with AirTAC CMSE reed and DMSE electronic sensors. The integrated field-adjustable air cushion at both ends allows technicians to dial in end-of-stroke deceleration, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X50SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of thrust at 0.5 MPa to actuate lower clamps on a press brake, utilizing the CA clevis to accommodate the swing arm pivot during sheet metal bending.
Uses its 50 mm stroke to rapidly push heavy pallets onto a side exit chute, relying on the adjustable end cushions to absorb the 1402 N retract load without shock.
Drives a yarn tensioning guide on a weaving loom, where the built-in magnet triggers DMSE solid-state sensors to confirm thread positioning at high cycle rates.
When sizing this 63 mm bore actuator, consider stepping down to the 50 mm bore if your load requires less energy, which yields 982 N of push force at 0.5 MPa. Conversely, if your application demands greater thrust, upgrading to the 80 mm bore provides 2513 N of push force at 0.5 MPa. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; any position-holding requirement necessitates a BSE rod lock or an external pilot-operated check valve. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing identical mounting footprint dimensions, PT3/8 ports, and M16x1.5 rod threads.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The absolute maximum push capacity is 318 kgf when operating at the maximum rated pressure of 1.0 MPa.
Yes, it is dimensionally interchangeable per the ISO 15552 standard, serving as a direct replacement for other ISO 15552 profile cylinders without modifying mounting hardware. Additionally, the built-in magnet works seamlessly with AirTAC CMSE reed switches and DMSE electronic sensors for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.