Airtac SE63 Standard Cylinder SE63X560SCBCR
The AirTAC SE63 Standard Cylinder SE63X560SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 560mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke560 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X560SCBCR
The AirTAC SE63X560SCBCR is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force and 1402 N of pull force at 0.5 MPa. Driven through a PT3/8 port, it uses a 20 mm hard-chrome rod with an M16x1.5 thread. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts neatly against machine frames.
This 63 mm bore unit includes a built-in magnet for CMSE reed and DMSE electronic position sensing, allowing precise end-of-stroke verification. The field-adjustable pneumatic cushioning at both ends lets technicians dial in end-stop deceleration via a set screw, softening impacts during high-velocity 560 mm strokes.
Airtac SE63 Standard Cylinder SE63X560SCBCR Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X560SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 560 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X560SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×560 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X560SCBCR Is Used
Palletizer Flap Folder
Delivers 1559 N of push at 0.5 MPa to fold heavy cardboard flaps on automated palletizing lines, utilizing the 560 mm stroke to reach across wide loads.
Diversion Gate Actuator
Shifts heavy diverter gates on parcel sorting conveyors, where the CB clevis absorbs linkage stress and the 318 kgf max output handles dynamic inertia.
Textile Beam Lifter
Raises and lowers heavy warp beams in textile manufacturing, relying on the flush profile barrel for compact vertical mounting and DMSE sensors for stroke tracking.
Is the Airtac SE63 Standard Cylinder SE63X560SCBCR the Right Cylinder?
Stepping down to the 50 mm bore drops the 0.5 MPa push to 982 N, while moving up to the 80 mm bore raises it to 2513 N. Because this 560 mm stroke creates a long unsupported rod extension, an external guide is strongly recommended to prevent rod-bearing bending under side loads. The CB double-clevis mount accommodates angular misalignment, and the -S magnet pairs directly with CMSE or DMSE switches. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders for seamless retrofits. Note that the adjustable cushion only decelerates the piston; it does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X560SCBCR FAQ
This 63 mm bore cylinder uses a PT3/8 port and generates 1559 N push and 1402 N pull at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, and the absolute maximum push is 318 kgf at 1.0 MPa.
It is dimensionally interchangeable with any ISO 15552 profile cylinder, sharing standardized mounting dimensions. However, it does not hold loads if air is lost; the adjustable air cushion only decelerates the piston near stroke end and is not a locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X560SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.