
The AirTAC SE63 Standard Cylinder SE63X60 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X60 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving three sensor grooves fully exposed.
This 63 mm bore unit operates at 30-800 mm/s and features field-adjustable pneumatic cushioning at both ends to soften hard end-stops during high-speed cycling. This specific SKU is built without a magnet, so it does not support internal position sensing out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X60 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of extend force to securely clamp heavy cast iron engine blocks onto machining centers, utilizing the 60 mm stroke for rapid actuation.
Drives mechanical folding arms on continuous packaging lines, using its adjustable end cushions to absorb kinetic energy during 30-800 mm/s cycling.
Actuates routing gates on logistics conveyors to redirect heavy wooden pallets, benefiting from the tie-rod-free profile body that prevents debris snagging.
With a 60 mm stroke and 1559 N push at 0.5 MPa, this bore sits perfectly in the mid-range. If you need less force, the SE50X60 provides 982 N push, while stepping up to the SE80X60 yields 2513 N. Because this is a standard double-acting cylinder, the piston will drift if air pressure is lost or the valve centers; applications requiring dead-stop holding must use a BSE rod lock or external check valve. For ISO 15552 retrofits, match the 63 mm bore, 60 mm stroke, PT3/8 port, and your specific mounting accessory.
Quick checklist
At 0.5 MPa, the SE63X60 delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, push increases to 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE63X60 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing foot or flange mounts, but note this specific SKU lacks a magnet, so it cannot trigger CMSE or DMSE sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.