verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X60S

The AirTAC SE63 Standard Cylinder SE63X60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke60 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$85.83 $93.33Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X60S

The AirTAC SE63X60S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push at 0.5 MPa over a short 60 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting on tight machine frames.

Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, protecting tooling from hard mechanical impacts.

Airtac SE63 Standard Cylinder SE63X60S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X60S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke60 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X60S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X60S Is Used

straighten

Injection Mold Ejection

Uses the 1559 N extend force and short 60 mm stroke to positively eject plastic parts from molding press platens without over-traveling.

precision_manufacturing

CNC Fixture Clamping

Secures heavy aluminum castings inside machining centers, relying on the 1402 N retract pull and DMSE electronic sensors to confirm clamp engagement.

packaging

Carton Flap Folding

Cycles rapidly at 30-800 mm/s to tuck corrugated carton flaps prior to case sealing, utilizing adjustable cushions to prevent tearing the cardboard.

Is the Airtac SE63 Standard Cylinder SE63X60S the Right Cylinder?

Delivering 1559 N of push force at 0.5 MPa, this 63 mm bore is the optimal mid-range choice. If your application requires less force, the 50 mm bore provides 982 N; stepping up to the 80 mm bore yields 2513 N. Because the 60 mm stroke is non-standard, expect a brief made-to-order lead time. As a true ISO 15552 profile cylinder, it serves as a direct replacement sharing standard mounting dimensions and a PT3/8 port.

Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve centers, so it cannot hold a load safely without live pressure. For tasks requiring mechanical position holding, consider the BSE rod-lock variant or an external pilot-operated check valve.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X60S FAQ

At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE63X60S shares the exact ISO 15552 / VDMA 24562 mounting interface and PT3/8 port, making it dimensionally interchangeable with other ISO 15552 profile cylinders. The integrated -S magnet also supports AirTAC CMSE and DMSE position sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X60S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X60S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.