
The AirTAC SE63 Standard Cylinder SE63X65 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 65mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X65 is a double-acting, single-rod ISO 15552 profile cylinder delivering a 1559 N push force at 0.5 MPa. Its 65 mm stroke and PT3/8 port make it a robust choice for mid-range actuation. The square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This unit includes field-adjustable air cushioning at both ends to decelerate the piston smoothly near the stroke limits. Because this specific SKU lacks the -S magnet code, it is not equipped for AirTAC CMSE or DMSE position sensing out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X65 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N extend force to push heavy glass containers onto parallel packaging lanes without stalling.
Regulates the flow of metal bar stock swarf with a compact 65 mm stroke that fits tight machine enclosures.
Deploys the 2182 N force available at 0.7 MPa to tuck thick cardboard flaps rapidly during case sealing.
At 0.5 MPa, this 63 mm bore generates 1559 N of push force. If your application requires less energy, the 50 mm bore offers 982 N of push; if you need more muscle, stepping up to the 80 mm bore yields 2513 N. Keep in mind that a standard SE cylinder will drift if air pressure is lost, so a BSE rod lock variant is necessary for fail-safe load holding.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware. For this 65 mm stroke, side-load stress on the rod bearing is minimal, but always verify structural support when driving offset loads.
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force reaches 2182 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 318 kgf.
This specific SE63X65 SKU does not include the -S magnet option, so it cannot host AirTAC CMSE or DMSE sensors. If position detection is required, select an SE63X65S variant with the built-in magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.