
The AirTAC SE63 Standard Cylinder SE63X700STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X700STC is a double-acting single-rod profile cylinder built to the ISO 15552 dimensional standard. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 63 mm bore and a 700 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a built-in position magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. It also features a TC centre trunnion mounting style, providing a pivoting anchor point ideal for articulating mechanisms. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration, protecting the rod and load from hard impacts.
| Model | Airtac SE63 Standard Cylinder SE63X700STC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 700 mm stroke and TC trunnion mount to pivot a diverter arm on a packaging line, smoothly routing heavy wood pallets with 1559 N of push force.
Extends fully to fold large corrugated box flaps during automated case erecting, relying on the adjustable cushion to soften the end stop at high cycling speeds.
Drives a heavy sliding safety gate on a robotic welding cell, using the -S magnet and DMSE electronic sensors to confirm barrier position to the PLC.
Selecting this 63 mm bore makes sense when your application requires the 1559 N push at 0.5 MPa. If you need less force and a smaller footprint, the 50 mm bore provides 982 N of push. If your payload is heavier, stepping up to the 80 mm bore yields 2513 N. Because this unit features a 700 mm stroke, the unsupported rod length during extension is significant; you must use an external guide to prevent rod-bearing bending and premature seal wear under side loads.
This model uses a PT3/8 port and a TC centre trunnion mount. The included -S magnet enables precise end-position detection. Note that a standard SE cylinder relies on air pressure to hold its load; if air is lost or the valve centers, the piston will drift. For positive load holding without live pressure, consider the BSE rod lock variant.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X700STC is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same TC mounting hardware and PT3/8 port connections without modifying the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.