
The AirTAC SE63 Standard Cylinder SE63X71S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 71mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X71S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It provides a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force, making it highly effective for mid-range actuation. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that resists corrosion and mounts flush within tight machine cavities.
Equipped with a built-in magnet (S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s operations without relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63X71S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 71 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×71 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to fold and seal heavy corrugated carton blanks reliably at high cycling speeds.
Uses the 71 mm stroke to actuate routing gates on packaging conveyors, benefiting from the flush profile barrel design.
Secures medium-weight aluminum castings during machining, utilizing the built-in magnet for immediate DMSE sensor feedback.
If your assembly requires less force, the 50 mm bore offers 982 N push at 0.5 MPa, whereas stepping up to the 80 mm bore yields 2513 N for heavier payloads. The 71 mm stroke and PT3/8 port make this model a direct dimensional replacement for any standard ISO 15552 cylinder, sharing identical mounting hardware and interface dimensions. Remember that a standard SE does not hold its load when air pressure is lost; if your workflow requires true position holding, consider the BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
The SE63X71S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. It features a 20 mm rod with an M16x1.5 thread and a PT3/8 port.
Yes, the SE63X71S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using existing mounting accessories, while the built-in magnet enables direct CMSE or DMSE sensor integration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.