Airtac SE63 Standard Cylinder SE63X75SCBCR
The AirTAC SE63 Standard Cylinder SE63X75SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 75mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke75 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X75SCBCR
The AirTAC SE63X75SCBCR is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and reduces snag points in tight machine cells.
Equipped with a built-in magnet for CMSE reed and DMSE electronic position sensing, this 63 mm bore unit utilizes PT3/8 ports and a 36 mm adjustable air cushion at both ends. The cushion screws let technicians dial in end-of-stroke deceleration to absorb kinetic energy smoothly, preventing hard mechanical impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63X75SCBCR Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X75SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X75SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X75SCBCR Is Used
Press Tool Ejection
Provides 1559 N of extend force to eject stamped metal blanks from a die, using the 75 mm stroke to clear the tooling before the conveyor advances.
Case Flap Folding
Drives a mechanical arm to fold corrugated carton flaps at high speed, relying on the field-adjustable cushion to soften the end stop and protect the packaging.
Pallet Diverter Gate
Actuates a routing gate on a packaging line, where the CB clevis mount accommodates pivot arc movement and the DMSE sensor confirms gate position.
Is the Airtac SE63 Standard Cylinder SE63X75SCBCR the Right Cylinder?
This 63 mm bore generates 1559 N push at 0.5 MPa, sitting perfectly between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push) for mid-range actuation. Because the CB double clevis mounting accessory allows pivoting articulation, it accommodates angular rod deflection during the 75 mm travel without binding. For positioning tasks, the integrated -S magnet interfaces seamlessly with AirTAC CMSE and DMSE switches. Remember that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure drops, so specify a BSE rod lock for fail-safe vertical holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X75SCBCR FAQ
This 63 mm bore cylinder operates at speeds of 30-800 mm/s. At 0.5 MPa it provides 1559 N push and 1402 N pull force. At 0.7 MPa the push increases to 2182 N, and the maximum push capacity is 318 kgf at 1.0 MPa.
Yes. The SE series is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 cylinders. It shares standard mounting footprints and utilizes PT3/8 ports, allowing a direct replacement without modifying existing machine frames.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X75SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.