
The AirTAC SE63 Standard Cylinder SE63X75SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 75mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X75SFTC is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing no vulnerable hardware.
Equipped with a built-in magnet for CMSE and DMSE position sensing, this 63 mm bore unit uses a PT3/8 port and a Ø20 mm piston rod. The field-adjustable air cushioning at both ends allows technicians to dial in the exact deceleration needed to soften hard end stops during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X75SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of secure clamping force to hold aluminum engine blocks in place during high-speed CNC milling operations.
Uses the 75 mm stroke to rapidly fold corrugated cardboard side flaps on a continuous packaging line prior to top sealing.
Actuates a routing gate on a logistics conveyor, swiftly redirecting heavy wooden pallets onto a secondary packaging spur.
This 63 mm bore generates 1559 N of push force at 0.5 MPa. If your application requires less thrust, stepping down to the 50 mm bore yields 982 N; conversely, scaling up to the 80 mm bore provides 2513 N. Because this model includes an FTC centre-trunnion mount and a built-in magnet, it drops seamlessly into existing ISO 15552 dimensional footprints without custom brackets.
Remember that a plain SE cylinder relies on continuous air pressure to hold a load; if pneumatic supply is lost, the piston will drift. For vertical loads requiring mechanical holding during an outage, consider the BSE rod-lock variant. At a 75 mm stroke, side-load stress on the rod bearing is minimal, so no external guide is strictly necessary.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with any standard ISO 15552 cylinder, meaning it shares identical mounting and centre-trunnion dimensions. Because this model includes the -S magnet, it is fully compatible with AirTAC CMSE reed switches and DMSE electronic sensors for precise end-position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.