verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X769S

The AirTAC SE63 Standard Cylinder SE63X769S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 769mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke769 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$192.12 $199.62Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X769S

The AirTAC SE63X769S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a non-standard 769 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it highly effective for driving heavy linear mechanisms over extended distances. The extruded aluminum barrel omits external tie rods, yielding a smooth, compact body that resists corrosion and simplifies flush mounting on machinery.

This specific unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 30-800 mm/s.

Airtac SE63 Standard Cylinder SE63X769S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X769S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke769 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X769S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×769Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X769S Is Used

conveyor_belt

Palletizer Strapper

Drives the extended 769 mm stroke to strap and secure heavy wooden pallets, utilizing the 1559 N push force to tension heavy-duty steel banding.

science

Textile Dye Range

Actuates a long-travel fabric guide or batching roller carriage, where the smooth no-tie-rod profile prevents fiber snagging in humid environments.

warehouse

Multi-Tier Storage Lift

Extends the 769 mm stroke to position a vertical lifting fork inside automated vertical lift modules (VLMs), tracking position via the -S magnet and DMSE sensors.

Is the Airtac SE63 Standard Cylinder SE63X769S the Right Cylinder?

This 63 mm bore provides 1559 N of push force at 0.5 MPa. If your application requires less thrust, the 50 mm bore offers 982 N; if you need more power to overcome higher friction, stepping up to the 80 mm bore yields 2513 N. Because the 769 mm stroke exceeds the 1500 mm standard maximum, this unit is manufactured as a made-to-order configuration.

At 769 mm of travel, the 20 mm rod and internal bearing face significant bending moments under side loads; utilizing an external guide rail is strongly recommended to prevent premature wear. Remember that a standard SE cylinder relies on live air pressure to move and hold the load—if air is lost, the piston will drift. For failsafe load holding, consider the BSE rod lock variant. As a true ISO 15552 cylinder, this model drops directly into existing setups sharing the same PT3/8 port and 63 mm mounting footprint.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X769S FAQ

At 0.5 MPa, the SE63X769S delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The absolute maximum push capacity is 318 kgf when operated at the maximum rated pressure of 1.0 MPa.

No. The field-adjustable air cushioning at both ends only decelerates the piston near the stroke limits to soften end-stop impacts; it does not lock or hold the load. If air pressure is lost or the valve is centered, the piston will drift. For secure position holding without live pressure, you should use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X769S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X769S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.