
The AirTAC SE63 Standard Cylinder SE63X830S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 830mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X830S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. Operating at 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, scaling up to a maximum output of 318 kgf at 1.0 MPa. Because this unit features an 830 mm stroke—exceeding the 1500 mm standard maximum for a 63 mm bore—it is produced as a non-standard, made-to-order configuration.
This model includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing sensor grooves on three sides for flexible switch placement.
| Model | Airtac SE63 Standard Cylinder SE63X830S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 830 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×830 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leverages the 830 mm stroke to push heavy wooden pallets cleanly across a transfer line, utilizing the 1559 N push force to overcome friction without stalling.
Uses the integrated magnet with DMSE electronic sensors to confirm full extension at high speeds, rapidly ejecting misaligned corrugated boxes from a packaging conveyor.
Deploys the adjustable end cushions to soften the hard mechanical stops when feeding metal coils into a stamping press, preventing shock damage to the tooling.
When sizing this actuator, stepping down to a 50 mm bore reduces the 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore increases it to 2513 N. For direct retrofits, this cylinder is dimensionally interchangeable per ISO 15552, requiring only the matching PT3/8 porting and standard 63 mm mounting accessories. It operates at speeds of 30-800 mm/s.
Because the 830 mm stroke is non-standard and lengthy, the unsupported piston rod (Ø20 mm, M16x1.5 thread) is highly susceptible to bending under lateral loads; an external guide mechanism is strongly recommended to prevent rod-bearing damage. Note that while field-adjustable air cushions at both ends decelerate the piston near stroke end, a plain SE cylinder cannot hold a load if air pressure is lost—applications requiring static holding need a BSE rod lock variant.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, and the absolute maximum push is 318 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE63X830S is dimensionally interchangeable per ISO 15552. You can drop it into existing foot or flange mounts using the standard PT3/8 ports, but ensure your sensor setup matches the AirTAC CMSE or DMSE groove format.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.