
The AirTAC SE63 Standard Cylinder SE63X850 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 850mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X850 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a non-standard 850 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for demanding industrial positioning tasks. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. Because this specific SKU lacks the -S magnet option, it does not support AirTAC CMSE or DMSE position sensing out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X850 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force at 850 mm stroke to positively eject heavy pallets off a main conveyor belt without stalling.
Acts as a long-stroke pusher to advance raw bar stock into a CNC lathe spindle, relying on adjustable cushions to soften the 800 mm/s retraction stop.
Deploys the extended 850 mm stroke to shove storage totes firmly into high-density automated warehouse shelving channels.
Selecting this bore makes sense when a 50mm cylinder (982 N push @0.5 MPa) is underpowered, but an 80mm unit (2513 N push @0.5 MPa) is physically oversized. At 850 mm, this stroke exceeds the 63mm bore's 1500 mm standard maximum, meaning it is manufactured as a made-to-order unit. For an unsupported span this long, the Ø20 mm piston rod is highly susceptible to bending under side loads; integrating an external linear guide is essential to prevent premature rod-bearing wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, utilizing standard PT3/8 ports and shared mounting hardware. Remember that a standard SE cylinder relies on live air pressure to hold position; if the air supply drops, the piston will drift and cannot hold a load.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at the maximum operating pressure of 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 for a direct replacement using standard mounting accessories. However, because this specific SKU lacks the -S magnet code, it cannot support AirTAC CMSE or DMSE position sensors without modifying the piston assembly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.