
The AirTAC SE63 Standard Cylinder SE63X90S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 90mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X90S is a double-acting, single-rod ISO 15552 profile cylinder delivering a robust 1559 N push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush and resists corrosion in demanding environments.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to tune deceleration via a set screw, softening hard mechanical stops during high-speed 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X90S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to swing diverter arms on a 30-800 mm/s packaging conveyor, using the -S magnet to confirm arm position with DMSE sensors.
Secures heavy cast aluminum blocks during machining, leveraging the 36 mm adjustable cushion to prevent end-cap hammering on rapid 90 mm retraction strokes.
Ejects formed plastic parts from a mold cavity, where the tie-rod-free extruded profile allows tight mounting between press columns without protruding hardware.
At 0.5 MPa, this 63 mm bore generates 1559 N of push force. If your application requires less energy, stepping down to the 50 mm bore yields 982 N. For heavier payloads, stepping up to the 80 mm bore provides 2513 N. Because the 90 mm stroke is under 300 mm, side-load stress on the M16x1.5 rod thread is minimal, though long unsupported loads still need an external guide.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders. To match this exact unit, specify a 63 mm bore, 90 mm stroke, PT3/8 port, and the -S magnet. Note that a plain SE cylinder will drift if air pressure is lost; if your process must hold a load safely without live pressure, consider the BSE rod-lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The 63 mm bore provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No. The adjustable air cushion only decelerates the piston near the stroke end; it is not a brake. If the air supply is lost or exhausted, the rod will drift. For fail-safe load holding, use the BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.