Airtac SE32 Standard Cylinder SE32AX75S
The AirTAC SE32 Standard Cylinder SE32AX75S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32AX75S
The AirTAC SE32AX75S is a double-acting ISO 15552 profile cylinder with a 32mm bore and 75mm stroke. It delivers 402N of push force at 0.5MPa, making it well-suited for compact, lower-force automation tasks. The square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while freeing up peripheral space.
This specific configuration includes a SUS420J2 stainless steel rod (code A) for corrosive or washdown environments, and a built-in magnet (code S) for position sensing. The integrated magnet is fully compatible with AirTAC CMSE reed and DMSE electronic switches, which drop directly into the sensor grooves machined on three sides of the body.
Airtac SE32 Standard Cylinder SE32AX75S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32AX75S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32AX75S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32AX75S Is Used
Lab Diagnostic Dispensing
The 75mm stroke and SUS420J2 stainless rod withstand chemical wipe-downs while accurately moving 402N to position fluid dispensing heads on automated analyzers.
Small Carton Flap Folding
Provides reliable 402N push at 0.5MPa to fold minor flaps on packaging lines, with the -S magnet triggering DMSE sensors to confirm flap closure.
PCB Router Clamping
Holds printed circuit boards during routing operations; the smooth tie-rod-less profile prevents debris buildup while the adjustable cushion softens the 75mm stroke ends.
Is the Airtac SE32 Standard Cylinder SE32AX75S the Right Cylinder?
The 32mm bore provides 402N push at 0.5MPa. If your application requires less force, you can step down to a 25mm bore (not an SE standard ISO bore, but available in other series), or step up to the 40mm bore which provides 628N push at 0.5MPa. Because this is a single-rod double-acting cylinder, it does not hold its position if air pressure is lost or the valve is centered; the piston will drift. For applications requiring mid-stroke locking or fail-safe holding, consider the BSE rod-lock variant or an external pilot-operated check valve. To replace an existing ISO 15552 cylinder, match the 32mm bore, 75mm stroke, PT1/8 port, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32AX75S FAQ
At 0.5 MPa, the SE32AX75S provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force is 563N. The maximum push force is 82 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE32AX75S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders by matching the 32mm bore, 75mm stroke, PT1/8 port, and mounting hardware. The built-in magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32AX75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.