Airtac SE32 Standard Cylinder SE32BX25
The AirTAC SE32 Standard Cylinder SE32BX25 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX25
The AirTAC SE32BX25 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation. It delivers 402 N of push force at 0.5 MPa alongside a 25 mm stroke, making it suited for precise short-travel tasks.
This unit features a SUS304 stainless steel rod for superior washdown and corrosion resistance. Its square extruded aluminum barrel omits external tie rods for a clean profile, while field-adjustable air cushions at both ends let you fine-tune end-stop deceleration.
Airtac SE32 Standard Cylinder SE32BX25 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX25 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX25
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX25 Is Used
Lab Dispense Gate
Uses the 402 N push force and SUS304 rod to pivot a corrosion-resistant diverter gate in chemical lab dispensing machines.
Pouch Sealer Jaw
Closes a short 25 mm stroke jaw on a food packaging line, where the stainless rod withstands daily washdowns.
PCB Reject Arm
Actuates a small reject arm on an SMT conveyor, relying on the compact 32 mm profile to fit tight machine bays.
Is the Airtac SE32 Standard Cylinder SE32BX25 the Right Cylinder?
At 402 N push (0.5 MPa), this 32 mm bore fits light-duty tasks. If you need less force, there is no smaller ISO 15552 bore in this series; step up to the 40 mm bore for 628 N push. As a standard double-acting cylinder, it will drift if air is lost and cannot hold a load mid-stroke without a pilot-operated check valve. It serves as a direct replacement for any ISO 15552 cylinder using the PT1/8 port and M10x1.25 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX25 FAQ
At 0.5 MPa, the SE32BX25 provides 402 N push and 345 N pull. At 0.7 MPa, push is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
No, the SE32BX25 is a standard double-acting cylinder and will drift if air pressure is lost. The adjustable air cushion only decelerates the piston near the stroke ends; it does not lock the rod. For position holding, use a BSE rod lock or an external check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.