Airtac SE32 Standard Cylinder SE32BX25S
The AirTAC SE32 Standard Cylinder SE32BX25S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX25S
The AirTAC SE32BX25S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, space-constrained actuation. Delivering 402 N of push force at 0.5 MPa and a maximum of 82 kgf at 1.0 MPa, this 32 mm bore unit integrates a 12 mm SUS304 stainless steel rod, making it highly resistant to corrosion and ideal for washdown or chemically exposed environments.
Its square extruded aluminum barrel omits external tie rods, yielding a flush exterior that simplifies mounting and prevents debris accumulation. The integrated -S magnet supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection, while field-adjustable air cushions at both ends allow you to tune deceleration and soften hard end stops.
Airtac SE32 Standard Cylinder SE32BX25S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX25S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX25S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX25S Is Used
Laboratory Dispense Clamping
Secures small vial fixtures during automated fluid dispensing, utilizing the 402 N push force and SUS304 rod to resist chemical exposure.
Conveyor Diverter Gate
Actuates a short-stroke routing flap on a packaging line, where the 25 mm stroke and flush profile barrel prevent debris buildup.
PCB Edge Guide Ejection
Pushes populated circuit boards out of an assembly fixture, relying on the DMSE electronic sensor feedback for precise ejection timing.
Is the Airtac SE32 Standard Cylinder SE32BX25S the Right Cylinder?
Selecting the SE32BX25S is optimal when your application requires short 25 mm strokes and moderate force. If you need less thrust, stepping down is not an option as 32 mm is the smallest standard bore; however, if your load demands more power, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Keep in mind that as a standard double-acting cylinder, this model will drift if air pressure is lost; if your process requires strict position holding without live pressure, consider the BSE rod-lock variant. For retrofitting, this cylinder is dimensionally interchangeable with any ISO 15552 cylinder of the same bore and stroke, utilizing the standard PT1/8 port and basic mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX25S FAQ
The SE32BX25S delivers 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N, with an absolute maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end and does not lock or hold the load. If air is lost, the piston will drift; for fail-safe position holding, you must use a BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.