Airtac SE32 Standard Cylinder SE32BX320S
The AirTAC SE32 Standard Cylinder SE32BX320S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 320mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke320 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX320S
The AirTAC SE32BX320S is a double-acting, single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. It features a 32 mm bore and a 320 mm stroke, delivering 402 N of push force and 345 N of pull force at 0.5 MPa. Equipped with a SUS304 stainless steel rod, it is specifically designed for corrosive environments and washdown duty where a standard carbon steel piston rod would fail.
The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mount profile that resists corrosion and simplifies fixture integration. Field-adjustable pneumatic cushioning at both end caps allows you to tune the deceleration of the piston via a set screw, softening hard end stops during high-speed cycling. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position sensing for automated feedback.
Airtac SE32 Standard Cylinder SE32BX320S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX320S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX320S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×320 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX320S Is Used
Laboratory Washdown Station
The SUS304 stainless rod withstands harsh chemical washdowns in pharmaceutical labs, while the 320 mm stroke precisely extends a spray nozzle over glassware racks.
Seafood Sorting Diverter
Delivering 402 N of push force at 0.5 MPa, this cylinder actuates a sorting gate on a seafood processing line, resisting saltwater corrosion without binding.
PCB Cleaning Fixture
The built-in magnet enables DMSE electronic sensors to confirm stroke endpoints for an electronics washing fixture, safely cycling at speeds up to 800 mm/s.
Is the Airtac SE32 Standard Cylinder SE32BX320S the Right Cylinder?
Generating 402 N of push at 0.5 MPa, this 32 mm bore cylinder is ideal for lighter-duty tasks. If your application requires less force, there is no smaller standard ISO 15552 bore available in this series. If you need more power, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Because this is a double-acting single-rod cylinder, it will not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider the BSE rod lock variant or an external pilot-operated check valve.
At 320 mm of stroke, the 12 mm diameter rod and its supporting bearing face an increased risk of bending under heavy side loads. For long unsupported extensions, always use an external guide to prevent premature wear. This model uses a PT1/8 port, an M10x1.25 rod thread, and a 27 mm cushion length. It is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX320S FAQ
At 0.5 MPa, the 32 mm bore generates 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end and does not act as a brake. If air is lost or the valve is centered, the piston will drift. For load holding without live pressure, use a BSE rod lock cylinder or an external locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX320S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.