Airtac SE32 Standard Cylinder SE32BX350S
The AirTAC SE32 Standard Cylinder SE32BX350S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke350 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX350S
The AirTAC SE32BX350S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding 350mm stroke tasks. It delivers 402N of push force at 0.5 MPa and features a SUS304 stainless steel piston rod (code B) for superior corrosion resistance in washdown or chemically harsh environments.
Unlike traditional tie-rod designs, its extruded aluminum barrel offers a flush, compact profile while integrating sensor grooves on three sides. The built-in magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic position switches, ensuring reliable end-of-stroke detection without external hardware.
Airtac SE32 Standard Cylinder SE32BX350S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX350S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX350S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX350S Is Used
Flow Wrapper Sealing
Drives the 350mm sealing jaw motion on continuous-motion flow wrappers, using the 402N push force to crimp packaging film cleanly in damp food processing areas.
Lab Sample Dispensing
Actuates fluid dispensing valves across a 350mm span, relying on the SUS304 stainless rod to withstand chemical exposure and frequent washdowns.
PCB Edge Trimming
Positions cutting heads for printed circuit board edge trimming, where the CMSE/DMSE sensor magnet confirms jaw position and the compact profile saves space.
Is the Airtac SE32 Standard Cylinder SE32BX350S the Right Cylinder?
For sizing flexibility, stepping up to the 40mm bore yields 628N push at 0.5 MPa, while dropping down is not an option as 32mm is the smallest standard SE size. Remember that a plain SE cylinder does not hold loads when air is exhausted; if your application requires static holding, consider the BSE rod lock variant.
With a 350mm stroke, the 12mm rod and M10x1.25 thread face potential bending forces under side loads. Always use an external guide to support the payload and prevent premature rod-bearing wear. This model is dimensionally interchangeable per ISO 15552, allowing a direct replacement for other ISO 15552 cylinders using the same mounting accessories and PT1/8 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX350S FAQ
At 0.5 MPa, the SE32BX350S provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force increases to 563N, with a maximum push of 82 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE32BX350S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, retaining existing mounting hardware and PT1/8 port connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.