Airtac SE32 Standard Cylinder SE32BX50H
The AirTAC SE32 Standard Cylinder SE32BX50H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX50H
The AirTAC SE32BX50H is a double-acting, single-rod ISO 15552 profile cylinder with a 32 mm bore and 50 mm stroke. It delivers a 402 N push force at 0.5 MPa, utilizing a SUS304 stainless steel rod and Viton FKM seals for high-temperature and corrosive washdown environments up to 150 C.
Built to the VDMA 24562 standard, this unit features a square extruded aluminum barrel without external tie rods, allowing flush, compact mounting while resisting corrosion. The field-adjustable pneumatic cushioning at both ends lets you tune end-of-stroke deceleration to protect payloads moving at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32BX50H Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX50H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX50H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX50H Is Used
Bottle Filling Capper
Drives the capping head on a beverage line where the 402 N push force securely tightens caps, while the SUS304 rod and Viton FKM seal withstands daily chemical washdowns at high temperatures.
PCB Depaneling Saw
Actuates a cutting blade guide in an electronics plant; the 50 mm stroke provides precise traversal, and the extruded profile barrel allows flush mounting to the machine frame without tie-rod interference.
Pouch Sealing Jaw
Closes heat-sealing jaws on a vertical form-fill-seal machine; the FKM seal survives ambient radiant heat up to 150 C, and the adjustable cushion softens the 50 mm end-stop impact to protect the sealing blade.
Is the Airtac SE32 Standard Cylinder SE32BX50H the Right Cylinder?
If your application requires less force, there is no smaller standard SE bore, so you would need to look at miniature cylinder series; if you need more power, stepping up to the 40 mm bore yields a 628 N push at 0.5 MPa. Because this is a plain double-acting cylinder, it will not hold a load if air pressure drops or the valve centers—the piston will drift, so a BSE rod lock is required for true position holding.
Dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 cylinders, matching the 32 mm bore, 50 mm stroke, PT1/8 port, and standard mounting accessories. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX50H FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 cylinders, matching the standard 32 mm mounting footprint and PT1/8 port. Additionally, the Viton (FKM) seal expands the operating temperature range up to 150 C, making it suitable for high-heat processes where standard rubber seals would fail.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX50H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.