Airtac SE32 Standard Cylinder SE32BX50S
The AirTAC SE32 Standard Cylinder SE32BX50S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX50S
The AirTAC SE32BX50S is a double-acting, single-rod ISO 15552 profile cylinder with a 32 mm bore and 50 mm stroke. It delivers 402 N of push force at 0.5 MPa and features a SUS304 stainless steel rod, making it highly suitable for corrosive or washdown environments. The extruded aluminum barrel lacks external tie rods, yielding a compact footprint that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit seamlessly integrates AirTAC CMSE reed and DMSE electronic position sensors along the three-sided sensor grooves. The field-adjustable air cushioning at both ends allows precise tuning of end-of-stroke deceleration to absorb mechanical shock during high-speed cycling.
Airtac SE32 Standard Cylinder SE32BX50S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX50S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX50S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX50S Is Used
Flow Wrapper End-Sealing
Drives the jaw mechanism on horizontal flow wrappers, using its 402 N push force and 50 mm stroke to cleanly crimp and seal film pouches at high speeds.
Lab Diagnostic Carousel
Indexes rotating sample carousels in clinical analyzers, where the SUS304 stainless steel rod withstands harsh chemical disinfectants and daily washdowns.
PCB Router Clamping
Secures printed circuit boards during routing operations, utilizing the compact tie-rod-free profile to maximize space within dense electronics assembly machinery.
Is the Airtac SE32 Standard Cylinder SE32BX50S the Right Cylinder?
If your application requires less force, the neighboring 25 mm bore (if applicable) or smaller frame would be the step down, while stepping up to a 40 mm bore yields 628 N of push at 0.5 MPa. Because this is a double-acting cylinder, it relies on live air pressure to hold a load; if air is lost or the valve centers, the piston will drift and cannot maintain position. For direct retrofits, verify the 50 mm stroke, PT1/8 port, and standard ISO 15552 mounting interface to ensure seamless hardware compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX50S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32BX50S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders, provided you match the PT1/8 port and mounting hardware. The built-in magnet also supports AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.