Airtac SE32 Standard Cylinder SE32BX50SH
The AirTAC SE32 Standard Cylinder SE32BX50SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX50SH
The AirTAC SE32BX50SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers 402 N of push force at 0.5 MPa and features a SUS304 stainless steel rod alongside a high-temperature FKM seal, extending operating thermal limits up to 150 C.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine cells. The integrated -S magnet interfaces directly with CMSE and DMSE electronic sensors, while field-adjustable pneumatic cushioning at both ends softens hard end stops.
Airtac SE32 Standard Cylinder SE32BX50SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX50SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX50SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX50SH Is Used
Lab Washdown Ejector
Pushes sample trays out of chemical spray zones using 402 N of force, relying on the SUS304 rod and FKM seal to withstand harsh cleaning fluids and 150 C heat.
PCB Depaneling Gate
Cycles a routing blade gate over a 50 mm stroke, where the flush profile barrel saves valuable space on densely packed electronics assembly benches.
Vial Discharge Sorter
Diverts filled pharmaceutical vials with precise 345 N pull force, utilizing the built-in magnet for DMSE electronic position verification at high cycle rates.
Is the Airtac SE32 Standard Cylinder SE32BX50SH the Right Cylinder?
Delivering 402 N push at 0.5 MPa, this 32 mm bore suits light-duty positioning. If less force is required, no smaller standard SE bore exists; however, stepping up to the 40 mm bore increases output to 628 N. Because the plain SE design lacks a locking mechanism, the piston drifts if air pressure drops—use a BSE variant for fail-safe load holding. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware, a PT1/8 port, and the -S magnet sensor specification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX50SH FAQ
At 0.5 MPa, it provides 402 N push and 345 N pull force. At 0.7 MPa, push increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa, and the operational speed ranges from 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards for direct retrofits. Furthermore, its FKM Viton seal expands the temperature range to 150 C, making it superior to standard NBR seals in thermal applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX50SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.