Airtac SE32 Standard Cylinder SE32BX75
The AirTAC Airtac SE32 Standard Cylinder SE32BX75 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX75
The AirTAC SE32BX75 is a double-acting, single-rod ISO 15552 profile cylinder with a 32 mm bore and 75 mm stroke. It delivers a 402 N push force at 0.5 MPa, making it well-suited for compact actuation tasks. The extruded aluminum barrel omits external tie rods, yielding a smooth, flush surface that simplifies mounting and resists corrosion.
This specific SKU features a SUS304 stainless steel rod (code B) for superior resistance in washdown or corrosive settings. It uses a PT1/8 port and a 12 mm diameter rod with an M10x1.25 thread. The barrel integrates sensor grooves on three sides, though this unit ships without a built-in position magnet.
Airtac SE32 Standard Cylinder SE32BX75 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX75 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX75
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX75 Is Used
Lab Diagnostic Equipment
The 402 N push force and SUS304 rod are ideal for moving fluid racks in chemical analyzers where corrosion resistance is mandatory.
Small Part Ejection
Provides a compact 75 mm stroke to eject small molded plastic parts from a die without stressing the machinery frame.
Carton Sealing Jaws
Drives lightweight sealing jaws on compact packaging lines, utilizing the smooth no-tie-rod profile to prevent debris buildup.
Is the Airtac SE32 Standard Cylinder SE32BX75 the Right Cylinder?
If your application requires slightly less force, the neighboring 25 mm bore (if available in your series) offers a lower profile, while stepping up to the 40 mm bore provides a 628 N push at 0.5 MPa for heavier demands. Because this is a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting hardware like FA front flanges or LB foot brackets. Note that the standard double-acting design does not hold position if air pressure is lost; for load-holding safety, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX75 FAQ
The SE32BX75 generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It features a PT1/8 port.
This specific SKU lacks the -S magnet, so it cannot host CMSE or DMSE sensors without modification. Additionally, the adjustable air cushions only decelerate the piston near stroke end; they do not lock or hold loads if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.