Airtac SE32 Standard Cylinder SE32BX750S
The AirTAC SE32 Standard Cylinder SE32BX750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX750S
The AirTAC SE32BX750S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 402 N at 0.5 MPa. It features a SUS304 stainless steel rod, making it highly suitable for corrosive environments or washdown duty where a standard carbon steel rod would fail.
The extruded aluminum barrel design eliminates external tie rods, creating a compact footprint that mounts flush against machine frames. Integrated sensor grooves on three sides accept CMSE reed and DMSE electronic switches, leveraging the built-in magnet for precise end-of-stroke detection over the 750 mm travel.
Airtac SE32 Standard Cylinder SE32BX750S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX750S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX750S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX750S Is Used
Lab Sample Dispensing
The SUS304 rod withstands chemical splashes while accurately positioning sample trays over a 750 mm travel, relying on the 402 N push force to move light carriers without hesitation.
Packaging Line Divert
Uses the integrated magnet with DMSE electronic sensors to confirm full extension at high speeds, pushing lightweight cartons off a primary belt with precise timing.
Textile Web Guiding
Adjustable pneumatic cushioning softens the rod deceleration at the stroke ends, preventing sudden jerks that would tear delicate fabric webs during continuous guiding motions.
Is the Airtac SE32 Standard Cylinder SE32BX750S the Right Cylinder?
This 32 mm bore generates 402 N of push at 0.5 MPa. If your application requires less force, a smaller option is not available in this standard ISO 15552 range, but if you need substantially more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Because this model features a 750 mm stroke, the 12 mm rod and front bearing face significant bending moments under side loads; always use an external guide rail to prevent premature seal wear.
The field-adjustable air cushion at both ends allows you to tune the end-of-stroke deceleration via a setscrew, softening hard impacts when cycling at speeds up to 800 mm/s. Note that this pneumatic cushion only decelerates the piston near the stroke end; it does not hold the load if air pressure is lost. For position holding, consider a BSE rod lock variant. As a dimensionally interchangeable ISO 15552 cylinder, it drops directly into existing foot, flange, or trunnion mounting hardware using the PT1/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX750S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, and the maximum push capacity is 82 kgf at 1.0 MPa. The standard operating speed range is 30-800 mm/s.
Yes, the SE32BX750S is dimensionally interchangeable with other ISO 15552 profile cylinders, matching standard mounting and PT1/8 port dimensions for direct retrofits. However, it cannot hold a load if air is lost; the adjustable cushion only decelerates the piston near the end of stroke and does not function as a mechanical brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.