Airtac SE32 Standard Cylinder SE32BX75S
The AirTAC SE32 Standard Cylinder SE32BX75S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX75S
The AirTAC SE32BX75S is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a 402 N push force at 0.5 MPa. It features a SUS304 stainless steel rod, making it highly suitable for corrosive environments or washdown duty where standard carbon steel rods would fail. The square extruded aluminum barrel completely eliminates external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
This 32mm bore unit includes a built-in magnet for position sensing and operates at speeds between 30 and 800 mm/s. Field-adjustable air cushioning at both end caps allows technicians to tune the deceleration of the 75mm stroke via a set screw, softening hard mechanical stops. The integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors dropped directly into the body's sensor grooves.
Airtac SE32 Standard Cylinder SE32BX75S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX75S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX75S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX75S Is Used
Lab Diagnostic Sorter
Leverages the 402 N push force and SUS304 rod to push sample vials in high-humidity diagnostic equipment without risking rod corrosion.
Pouch Sealing Clamp
Utilizes the 75mm stroke and adjustable end cushions to gently clamp packaging film jaws, ensuring consistent seals without harsh impact.
PCB Routing Gate
Employs the built-in magnet with DMSE sensors to track small diverter gates on electronics assembly lines within tight spatial footprints.
Is the Airtac SE32 Standard Cylinder SE32BX75S the Right Cylinder?
Selecting this 32mm bore provides 402 N of push at 0.5 MPa, making it ideal for compact, light-duty positioning. If your application requires less force, you would step out of the ISO 15552 standard range, but if you need more power, stepping up to the 40mm bore yields 628 N of push at 0.5 MPa. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered—the piston will drift. For critical load-holding tasks, consider the BSE series rod lock variant. As a true ISO 15552 profile cylinder, the SE32BX75S serves as a direct replacement for other ISO 15552 cylinders, matching the exact mounting interface, PT1/8 port, and M10x1.25 rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX75S FAQ
The SE32BX75S delivers a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
Yes, its ISO 15552 profile barrel makes it dimensionally interchangeable with other standard ISO 15552 cylinders, utilizing the same mounting hardware and PT1/8 ports. However, it is a double-acting cylinder and does not hold position unpowered; you must use a BSE rod lock for load-holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.