Airtac SE32 Standard Cylinder SE32BX800S
The AirTAC Airtac SE32 Standard Cylinder SE32BX800S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke800 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX800S
The AirTAC SE32BX800S is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and 800mm stroke. It delivers 402N of push force at 0.5 MPa and 563N at 0.7 MPa. The SUS304 stainless steel rod (code B) provides excellent corrosion resistance for washdown or chemically exposed environments, while the built-in magnet (-S) enables seamless positioning feedback via CMSE reed or DMSE electronic sensors.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting footprint that is dimensionally interchangeable with any ISO 15552 cylinder. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts at operating speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32BX800S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX800S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX800S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX800S Is Used
Lab Fluid Dispensing
The 402N push force and 800mm stroke accurately drive dispensing heads across laboratory benches, while the SUS304 rod withstands chemical splashes.
PCB Edge Guiding
Uses the built-in magnet with DMSE sensors for precise 800mm travel positioning of circuit boards during conveyor transfer, benefiting from the compact tie-rod-free profile.
Food Wrapper Cutoff
Actuates cutting blades over a 800mm span in washdown packaging lines, where the stainless steel rod prevents corrosion during daily high-pressure cleaning.
Is the Airtac SE32 Standard Cylinder SE32BX800S the Right Cylinder?
Delivering 402N push at 0.5 MPa, this 32mm bore unit is the smallest standard ISO 15552 option; stepping up to the 40mm bore yields 628N push if your load requires more force. Because this is an 800mm stroke, the unsupported piston rod is highly susceptible to bending under side loads—always use an external guide to prevent rod-bearing damage. As a drop-in ISO 15552 replacement, it matches standard mounting interfaces, PT1/8 ports, and M10x1.25 rod threads. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX800S FAQ
At 0.5 MPa, it provides 402N push and 345N pull force. At 0.7 MPa, the push force is 563N. The maximum push force is 82 kgf at 1.0 MPa. Operating speed ranges from 30 to 800 mm/s.
Yes, the SE32BX800S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, PT1/8 port, and M10x1.25 rod thread as other standard profile cylinders for easy retrofits.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.