Airtac SE32 Standard Cylinder SE32BX80H
The AirTAC Airtac SE32 Standard Cylinder SE32BX80H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX80H
The AirTAC SE32BX80H is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 402 N of push force at 0.5 MPa and features a SUS304 stainless steel rod paired with a high-temperature FKM seal, extending the operating range from -20 to +150 C for washdown or caustic duty.
Built with an extruded aluminum barrel free of external tie rods, this compact body mounts flush against machine frames while resisting corrosion. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32BX80H Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX80H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX80H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX80H Is Used
Lab Sterilizer Doors
Cycles high-temperature door latches on autoclaves where the FKM seal survives +150 C ambient heat and the 402 N push force secures the chamber.
Foil Pouch Sealing
Actuates heated sealing jaws on continuous packaging lines, leveraging the 80 mm stroke and SUS304 rod to resist daily chemical washdowns.
Small Part Ejection
Pushes delicate machined components out of CNC fixtures, using the adjustable pneumatic cushion to soften the end stop and prevent part marking.
Is the Airtac SE32 Standard Cylinder SE32BX80H the Right Cylinder?
Select this 32 mm bore when you need 402 N push at 0.5 MPa in a high-temperature or corrosive setting. If your application requires less force, a smaller option is not available in this standard ISO range, but if you need substantially more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Because this specific SKU lacks the -S magnet, it cannot host CMSE or DMSE position sensors; choose an -S variant if endpoint confirmation is required. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for any standard 32 mm bore, 80 mm stroke, PT1/8 ported cylinder with standard mounting accessories.
Note that a plain SE cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; integrate a BSE rod lock or external pilot-operated check valve for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX80H FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32BX80H is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other 32 mm profile cylinders, matching the PT1/8 port and standard mounting dimensions without altering your machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX80H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.