Airtac SE32 Standard Cylinder SE32X10
The AirTAC Airtac SE32 Standard Cylinder SE32X10 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 10mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke10 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X10
The AirTAC SE32X10 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation, delivering 402 N of push force at 0.5 MPa. Because it uses an extruded aluminum barrel without external tie rods, it provides a clean, corrosion-resistant exterior that mounts flush against machine frames, saving valuable space in tight assemblies.
This 32 mm bore unit features a 10 mm stroke and a PT1/8 port. It includes field-adjustable air cushioning at both ends to soften end-of-stroke impacts, though this specific SKU is configured without a sensor magnet (-S) and therefore does not natively support CMSE or DMSE position switches without modification.
Airtac SE32 Standard Cylinder SE32X10 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X10 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X10
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X10 Is Used
PCB Edge Guide Clamps
Provides 402 N of push at 0.5 MPa to secure circuit boards within wave soldering machines, using its 10 mm stroke for rapid, short-travel clamping.
Lab Dispenser Nozzle Actuation
Drives precision metering valves in automated liquid handling systems, where the compact 32 mm bore and flush profile barrel fit easily inside dense lab equipment.
Small Part Ejection
Ejects stamped electronic contacts from progressive dies, utilizing the 27 mm cushion length to decelerate the rod gently and prevent part ejection damage.
Is the Airtac SE32 Standard Cylinder SE32X10 the Right Cylinder?
With a 402 N push at 0.5 MPa, this 32 mm bore is the smallest standard SE size available. If your application requires less force, you would step out of the ISO 15552 range entirely, but if you need more power, stepping up to the 40 mm bore provides 628 N of push force at 0.5 MPa. Keep in mind that a plain SE cylinder relies on live air pressure to hold its position; if air is lost, the piston drifts, so a BSE rod lock variant is required for fail-safe load holding.
To match this model for an ISO 15552 retrofit, specify the 32 mm bore, 10 mm stroke, PT1/8 port thread, and your required mounting accessory (such as LB foot or FA front flange). Because the stroke is only 10 mm, side-load stress on the rod bearing is minimal, though external guides are always recommended for precise lateral stability.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X10 FAQ
The SE32X10 (32 mm bore) provides 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
Yes, the SE32X10 adheres strictly to the ISO 15552 / VDMA 24562 mounting interface, making it a drop-in replacement for other ISO 15552 profile cylinders. It uses a PT1/8 port and features adjustable air cushions at both ends, though this specific SKU lacks the internal magnet required for CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.