Airtac SE32 Standard Cylinder SE32X100LB
The AirTAC Airtac SE32 Standard Cylinder SE32X100LB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke100 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X100LB
The AirTAC SE32X100LB is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering 402 N of push force at 0.5 MPa, it features a 32 mm bore and a 100 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames. An LB foot mounting accessory is integrated for secure base fixation.
This model utilizes a field-adjustable air cushion at both ends to decelerate the piston near stroke limits, protecting your end stops from impact. Note that this specific SKU does not include a position magnet, so it operates without CMSE or DMSE electronic sensors. The PT1/8 port and M10x1.25 rod thread provide standardized pneumatic connections for straightforward integration.
Airtac SE32 Standard Cylinder SE32X100LB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X100LB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X100LB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X100LB Is Used
PCB Router Gantry
Drives the Z-axis plunge on a small PCB depaneling router, using its 100 mm stroke and 402 N push to cleanly route motherboard edges without stressing the panel.
Lab Dispense Head
Actuates a precision fluid dispensing head in a diagnostic machine, where the smooth tie-rod-free profile prevents dust accumulation and allows easy cleaning.
Carton Flap Folder
Folds minor flaps on small pharmaceutical cartons, relying on the LB foot mount to stabilize the cylinder against the 345 N retract pull during rapid cycling.
Is the Airtac SE32 Standard Cylinder SE32X100LB the Right Cylinder?
Selecting the SE32X100LB is ideal when your application requires 402 N of push force at 0.5 MPa. If you need less power, the next bore down is 25 mm (not an SE standard, consider the SMI series), but stepping up to the 40 mm bore yields 628 N of push. Because this is a standard 100 mm stroke, it drops directly into any ISO 15552 footprint using the LB foot mount and PT1/8 ports. Remember that the adjustable air cushion only softens end-of-stroke impacts; it does not hold the load if air pressure is lost. For position holding, explore a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X100LB FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N push and 345 N pull. At 0.7 MPa, push increases to 563 N. The maximum push is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X100LB is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the LB foot mount, PT1/8 port, and M10x1.25 rod thread without altering the machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X100LB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.