Airtac SE32 Standard Cylinder SE32X105
The AirTAC Airtac SE32 Standard Cylinder SE32X105 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke105 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X105
The AirTAC SE32X105 is a double-acting, single-rod ISO 15552 profile cylinder featuring a 32 mm bore and 105 mm stroke. It generates 402 N of push force at 0.5 MPa and 563 N at 0.7 MPa, making it well-suited for compact, lower-force automation tasks. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
Both end caps incorporate a field-adjustable pneumatic cushioning screw, allowing technicians to tune end-of-stroke deceleration and eliminate hard metal banging. This specific SKU is configured without a built-in magnet, meaning it is not wired for AirTAC CMSE or DMSE position sensing out of the box. The integrated 27 mm cushion length and M10x1.25 rod thread provide standardized kinematics for lighter-duty tooling.
Airtac SE32 Standard Cylinder SE32X105 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X105 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X105
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X105 Is Used
PCB Router Ejection
Provides the 402 N push at 0.5 MPa needed to eject cut printed circuit boards from a routing machine without damaging the substrate.
Carton Flap Tucking
Uses the 105 mm stroke to tuck inner flaps of small corrugated cartons on a continuous flow wrapper prior to sealing.
Lab Dispenser Gating
Actuates a pintle valve on a reagent dispensing line, leveraging the compact 32 mm profile body to fit within tight lab enclosures.
Is the Airtac SE32 Standard Cylinder SE32X105 the Right Cylinder?
Generating 402 N of push at 0.5 MPa, this 32 mm bore is the smallest standard ISO 15552 size available. If your application requires less force, you would step out of the ISO 15552 range entirely, but if you need more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. As a standard double-acting cylinder, it does not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve. Because the stroke is 105 mm, side-load stress on the rod bearing is minimal, though any misaligned load should still use an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X105 FAQ
The SE32X105 generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N. The maximum operating pressure is 1.0 MPa, yielding a maximum push force of 82 kgf.
Yes, the SE32X105 is dimensionally interchangeable per ISO 15552 standards. Its standardized mounting interface and PT1/8 port allow it to serve as a drop-in replacement for other ISO 15552 profile cylinders without altering the existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X105
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.