Airtac SE32 Standard Cylinder SE32X125FTC
The AirTAC Airtac SE32 Standard Cylinder SE32X125FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke125 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X125FTC
The AirTAC SE32X125FTC is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It provides 402 N of push force and 345 N of pull force at 0.5 MPa, making it well-suited for compact automation tasks requiring a 125 mm stroke. The extruded aluminum barrel lacks external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
This configuration uses an FTC mounting accessory and a PT1/8 port. Because this SKU lacks the built-in magnet suffix, it does not support direct CMSE or DMSE position sensing without modification. The field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, protecting the 12 mm rod from mechanical shock.
Airtac SE32 Standard Cylinder SE32X125FTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X125FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X125FTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X125FTC Is Used
PCB Drill Spindle Gating
Cycles a small safety gate over a printed circuit board drilling station, using the 402 N push force to positively lock the guard during high-speed spindle operations.
Small Carton Flap Folder
Employs the 125 mm stroke to fold the minor flaps on small pharmaceutical cartons, relying on the adjustable cushion to prevent tearing the light cardboard at cycle end.
Lab Sample Ejection
Pushes processed vial trays out of a centrifuge bay, where the smooth tie-rod-free profile prevents dust accumulation and allows easy wipe-down between test batches.
Is the Airtac SE32 Standard Cylinder SE32X125FTC the Right Cylinder?
Selecting the SE32X125FTC is ideal when your application requires around 402 N of push force at 0.5 MPa. If you need less power, stepping down to the 32 mm bore's nearest neighbor is not an option as this is the smallest ISO 15552 size; you would instead look at non-ISO compact cylinders. If your load demands more thrust, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Since this specific SKU has no magnet, you cannot use reed or electronic switches for position feedback.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other 32 mm bore profile cylinders, matching the exact mounting footprint and port locations. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it does not hold the load. If air pressure is lost, the rod will drift, requiring a separate rod lock or pilot-operated check valve for static holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X125FTC FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X125FTC is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting interface, port spacing, and rod thread size as other standard 32 mm profile cylinders. Note that this specific FTC-mounted SKU lacks a piston magnet, so it will not work with position sensors out of the box.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X125FTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.