Airtac SE32 Standard Cylinder SE32X130
The AirTAC Airtac SE32 Standard Cylinder SE32X130 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 130mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke130 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X130
The AirTAC SE32X130 is a double-acting single-rod profile cylinder delivering a 402 N push at 0.5 MPa. Built to the ISO 15552 standard, it features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 32 mm bore unit operates at 30-800 mm/s and relies on field-adjustable pneumatic cushioning at both ends to soften end-of-stroke impacts. Note that this specific SKU is configured without a piston magnet, meaning it will not trigger AirTAC CMSE or DMSE electronic position sensors without modification.
Airtac SE32 Standard Cylinder SE32X130 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X130 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X130
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X130 Is Used
PCB Drill Chuck Gating
Cycles a lightweight pneumatic gate to index drill chucks in electronics manufacturing, utilizing the 402 N push force and 130 mm stroke to clear the spindle path.
Small Carton Flap Folding
Drives a mechanical arm to tuck the minor flaps on small pharmaceutical cartons, where the compact tie-rod-free profile fits neatly within tight conveyor framing.
Lab Sample Tray Ejection
Pushes loaded sample trays out of a centrifuge bay, relying on the adjustable end cushions to prevent sudden stops from spilling sensitive liquids.
Is the Airtac SE32 Standard Cylinder SE32X130 the Right Cylinder?
At 0.5 MPa this 32 mm bore generates 402 N of push force, serving as the smallest standard ISO 15552 size in the AirTAC range. If your application requires less force you would step out of the ISO profile family, but if you need more power the next size up is the 40 mm bore, which provides 628 N of push at the same pressure. Because the stroke is 130 mm, side-load stress on the Ø12 mm rod and its bearing is moderate, though external guides should still be used to prevent binding. As a double-acting cylinder, it relies on continuous air pressure to hold a load and will drift if the valve is centered or air is lost; for positive holding, consider a BSE rod-lock variant. It provides a drop-in dimensional replacement for any standard ISO 15552 cylinder with a PT1/8 port and 130 mm stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X130 FAQ
The 32 mm bore provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE32X130 is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint, PT1/8 port, and M10x1.25 rod thread as other standard 32 mm bore profile cylinders. It is a drop-in replacement for any ISO 15552 cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.