Airtac SE32 Standard Cylinder SE32X135
The AirTAC Airtac SE32 Standard Cylinder SE32X135 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke135 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X135
The AirTAC SE32X135 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push force at 0.5 MPa, utilizing a 12 mm hard-chrome plated rod and a PT1/8 port. Because it uses an extruded aluminum barrel without external tie rods, the body is inherently corrosion-resistant and mounts flush against machine frames, saving valuable space in tight assemblies.
This 135 mm stroke model features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers. Note that this specific SKU is configured without a sensor magnet, meaning it operates as a blind actuator unless externally sensed or upgraded with a magnetic piston for CMSE or DMSE switches.
Airtac SE32 Standard Cylinder SE32X135 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X135 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X135
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X135 Is Used
PCB Depaneling Router
Provides the precise 402 N linear feed at 135 mm stroke to plunge a routing spindle along V-scored lines, cleanly singulating populated circuit boards without stressing components.
Small Bottle Capping
Drives a torque-limited capping head to apply plastic screw caps onto cosmetic bottles, using adjustable air cushions to softly seat the cap without cracking the finish.
Electronic Component Sorter
Actuates a diverter gate in a pick-and-place line to route microchips into acceptance bins, relying on the compact tie-rod-free profile to fit dense conveyor spacing.
Is the Airtac SE32 Standard Cylinder SE32X135 the Right Cylinder?
When sizing this 32 mm bore, consider stepping up to the 40 mm variant if your application requires a stronger 628 N push at 0.5 MPa. Conversely, if you are oversizing and need to drop down, the 32 mm is the smallest standard option in the SE family, offering 402 N of thrust at 0.5 MPa. As a true ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, making it a drop-in replacement that reuses existing mounting hardware like LB foot brackets or FA front flanges.
Because this SKU lacks the -S magnet option, it cannot directly host AirTAC CMSE reed or DMSE electronic position sensors without a piston upgrade. Furthermore, a plain SE cylinder does not hold its position when air pressure is lost or the valve is centered; the piston will drift. If your process demands secure load holding without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X135 FAQ
The SE32X135 generates a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X135 adheres strictly to the ISO 15552 / VDMA 24562 dimensional standard. Its extruded profile barrel and mounting interface make it dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing FA flanges or LB foot mounts without machining.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X135
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.