Airtac SE32 Standard Cylinder SE32X150FA
The AirTAC Airtac SE32 Standard Cylinder SE32X150FA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke150 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X150FA
The AirTAC SE32X150FA is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. It generates 402 N of push force at 0.5 MPa and pulls 345 N, making it well-suited for lighter-duty positioning tasks. This specific SKU features an FA front-flange mounting interface and a 150 mm stroke.
Unlike traditional tie-rod designs, its square extruded aluminum barrel omits external protruding rods, yielding a flush body that resists corrosion and simplifies mounting. The end-of-stroke deceleration is handled by a field-adjustable air cushion at both ends, allowing technicians to tune the screw to soften hard impacts at operating speeds up to 800 mm/s. Note that this configuration ships without a piston magnet, so it does not support CMSE or DMSE position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X150FA Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X150FA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X150FA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X150FA Is Used
PCB Routing Gate
Actuates a routing diverter on a printed circuit board assembly line, where the 402 N push at 0.5 MPa reliably shifts light aluminum gates without overwhelming the frame.
Film Roll Tensioner
Maintains precise tracking on a horizontal form-fill-seal machine, using the 150 mm stroke to pivot a dancer arm and adjust polymer film tension dynamically.
Lab Sample Dispenser
Drives a 24-well microplate dispenser in an analytical lab, where the FA front flange ensures rigid axial alignment and the no-tie-rod profile prevents dust accumulation.
Is the Airtac SE32 Standard Cylinder SE32X150FA the Right Cylinder?
Selecting the 32 mm bore is optimal when your application requires 402 N of push at 0.5 MPa. If your load demands less force, you can step down to the 25 mm bore (though 32 mm is the smallest standard SE size), or step up to the 40 mm bore which provides 628 N of push at 0.5 MPa for heavier payloads. Because this is a 150 mm stroke, the 12 mm rod and M10x1.25 thread provide adequate rigidity, but long unsupported strokes still require an external guide to prevent rod-bearing bending.
This SE32X150FA uses an FA front flange for secure axial load support and a PT1/8 port. As a standard double-acting cylinder, it relies on live air pressure to hold position; if air is lost or the valve is centered, the piston will drift. For drop-in retrofits, its ISO 15552 mounting dimensions allow direct replacement of other ISO 15552 cylinders without altering the front flange hardware. If position feedback is required, you would need the -S magnet option for CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X150FA FAQ
At 0.5 MPa, the SE32X150FA provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, its standardized ISO 15552 mounting interface makes it dimensionally interchangeable with other ISO 15552 profile cylinders. However, the adjustable air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If air pressure drops, the piston will drift, requiring a BSE rod lock variant for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X150FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.