Airtac SE32 Standard Cylinder SE32X165
The AirTAC Airtac SE32 Standard Cylinder SE32X165 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke165 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X165
The AirTAC SE32X165 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact linear motion. Delivering 402 N of push force at 0.5 MPa, it suits light-duty cycling. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This SKU lacks the built-in magnet option, meaning it is configured for standard actuation without AirTAC CMSE or DMSE position sensors. To protect the 12 mm rod at end-of-travel, field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard mechanical stops during 30-800 mm/s operation.
Airtac SE32 Standard Cylinder SE32X165 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X165 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X165
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X165 Is Used
PCB Depaneling Saw
Drives the linear cutting blade on an automated PCB routing machine, utilizing the 165 mm stroke to cleanly separate composite boards with 402 N of push force.
Carton Flap Folder
Folds minor flaps on small-format carton sealing lines, where the compact 32 mm profile barrel mounts flush into tight conveyor side-rails without external tie-rod interference.
Lab Dispense Head
Positions a precision metering valve over sample vials, relying on the field-adjustable end cushions to prevent fluid splashing during rapid 30-800 mm/s retraction.
Is the Airtac SE32 Standard Cylinder SE32X165 the Right Cylinder?
Stepping up to the 40 mm bore increases 0.5 MPa push force to 628 N for heavier loads, while dropping to a smaller bore is not an option as 32 mm is the smallest ISO 15552 standard. Because this plain SE variant lacks a rod lock, the piston will drift if air pressure is lost or the valve centers; applications needing true position holding require a BSE series cylinder or an external pilot-operated check valve. With a 165 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate side loads, but an external guide is recommended if the actuator pushes heavy lateral masses. This unit serves as a drop-in replacement for any ISO 15552 cylinder, matching standard mounting hardware and PT1/8 port locations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X165 FAQ
The SE32X165 generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa.
Yes, the SE32X165 is dimensionally interchangeable per ISO 15552 standards, matching standard mounting footprints and PT1/8 port locations for straightforward retrofits without custom brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X165
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.