Airtac SE32 Standard Cylinder SE32X170
The AirTAC Airtac SE32 Standard Cylinder SE32X170 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke170 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X170
The AirTAC SE32X170 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact automation. Delivering a 402 N push force at 0.5 MPa, it utilizes a 32 mm bore and a 170 mm stroke to execute precise linear motion. The square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant housing that simplifies bracket mounting in tight machine cells.
This specific SKU is configured without a position sensor magnet, relying on mechanical end-of-travel positioning. To protect the piston at cycle endpoints, field-adjustable pneumatic cushioning at both ends allows technicians to tune the exhaust bleed and soften the 27 mm cushion zone, preventing harsh impact at operating speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X170 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X170 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X170
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X170 Is Used
Lab Dispenser Indexing
Drives a 402 N push to shuttle microplate carriages between reagent stations, capitalizing on the compact 32 mm profile to fit narrow diagnostic enclosures.
Small Pouch Flap Sealing
Extends 170 mm to fold and press lightweight packaging flaps, using the adjustable end cushions to prevent jarring stops on high-speed flow wrappers.
PCB Router Gating
Actuates a diverter gate on a printed circuit board routing conveyor, where the tie-rod-free extruded body mounts flush to the machine frame without snagging wiring.
Is the Airtac SE32 Standard Cylinder SE32X170 the Right Cylinder?
Selecting the SE32X170 is optimal when a 402 N extend force at 0.5 MPa is required within a compact footprint. If your application demands less power, stepping down is not an option as 32 mm is the smallest standard bore; conversely, if you need greater thrust, stepping up to the 40 mm bore provides a 628 N push. Because this unit lacks the -S magnet, it cannot host AirTAC CMSE or DMSE electronic switches; if your sequence requires positional feedback, specify an SE32X170S instead.
Operating on standard PT1/8 ports and an M10x1.25 rod thread, this cylinder is dimensionally interchangeable with any ISO 15552 cylinder, ensuring a drop-in retrofit for existing mounting hardware. Note that a plain SE cylinder cannot hold a load when air pressure is lost; if your 170 mm stroke application requires static holding during an exhaust or power failure, integrate an external pilot-operated check valve or transition to the AirTAC BSE rod-lock variant. Furthermore, while the 12 mm rod handles standard axial loads, any stroke exceeding 300 mm necessitates an external guide to prevent rod-bearing bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X170 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides a 402 N push and a 345 N pull force. At 0.7 MPa, the push increases to 563 N, and the maximum rated push is 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE32X170 adheres strictly to the ISO 15552 / VDMA 24562 profile standard, making it dimensionally interchangeable with other ISO 15552 cylinders. It uses a PT1/8 port and shares standard mounting interfaces, allowing a drop-in retrofit without modifying the machine bed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X170
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.