Airtac SE32 Standard Cylinder SE32X175SLB
The AirTAC Airtac SE32 Standard Cylinder SE32X175SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke175 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X175SLB
The AirTAC SE32X175SLB is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 402 N and a pull force of 345 N at 0.5 MPa. Its 32 mm bore and 175 mm stroke make it a compact choice for lighter-duty motion. The square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes an LB foot mounting bracket for rigid base mounting and a built-in magnetic piston (-S) for position sensing. You can field-tune the pneumatic cushioning at both ends via an adjustment screw to soften end-of-stroke impacts, while the PT1/8 port and M10x1.25 rod thread keep the physical envelope standardized.
Airtac SE32 Standard Cylinder SE32X175SLB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X175SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X175SLB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X175SLB Is Used
PCB Drill Bit Changer
Provides the precise 402 N push force and 175 mm travel needed to shuttle drill bits in and out of the spindle on automated PCB drilling machines.
Small Package Diverter
Uses the LB foot mount to anchor a diverter arm on a packaging line, extending 175 mm to push lightweight cartons onto a secondary conveyor belt.
Lab Sample Ejector
Leverages the -S magnet with DMSE electronic sensors to confirm sample tube ejection in diagnostic equipment, relying on the smooth profile barrel for cleanroom compatibility.
Is the Airtac SE32 Standard Cylinder SE32X175SLB the Right Cylinder?
Selecting this 32 mm bore makes sense when your application requires around 402 N of push force at 0.5 MPa. If you need less power, stepping down is not an option as 32 mm is the smallest standard SE bore. If your load demands more thrust, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Because this cylinder uses an LB foot mount, ensure your base plate is tapped to accept the mounting hardware.
At a 175 mm stroke, the 12 mm rod is relatively slender, so verify the rod-end thread (M10x1.25) handles the expected tensile loads. Remember that a standard SE cylinder does not hold its position when air pressure is lost; the piston will drift if the valve centers or air is exhausted. For secure load holding, consider the BSE rod lock variant or an external pilot-operated check valve. This model is dimensionally interchangeable with other ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X175SLB FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf when operating at the 1.0 MPa pressure limit.
Yes, the SE32X175SLB adheres strictly to the ISO 15552 profile cylinder standard, meaning its mounting dimensions, PT1/8 port, and M10x1.25 rod thread are dimensionally interchangeable with other ISO 15552 cylinders. You can swap it into existing setups using the standard LB foot mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X175SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.