Airtac SE32 Standard Cylinder SE32X180
The AirTAC Airtac SE32 Standard Cylinder SE32X180 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke180 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X180
The AirTAC SE32X180 is a double-acting single-rod ISO 15552 profile cylinder with a 32mm bore and 180mm stroke. It delivers a 402N push force at 0.5 MPa, making it well-suited for compact actuation tasks. The extruded aluminum barrel lacks external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
This unit features field-adjustable pneumatic cushioning at both ends to soften hard end stops, utilizing a 27mm cushion length. As this specific SKU lacks the -S magnet suffix, it is not wired for CMSE or DMSE position sensing without modification. The standardized ISO 15552 dimensions ensure it drops directly into existing VDMA 24562 footprints.
Airtac SE32 Standard Cylinder SE32X180 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X180 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X180
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X180 Is Used
Flow Wrapper End-Seal Jaws
Drives the crank arm on continuous motion flow wrappers, using the 402N extend force to cleanly crimp and sever film webs at speed.
PCB Router Z-Axis Clamp
Secures printed circuit board panels during routing, where the compact 32mm profile and 180mm stroke allow tight nesting beside spindle motors.
Lab Dispense Valve Actuation
Pilots precision pinch valves for reagent dosing, benefiting from the adjustable end cushions to prevent liquid splashing at the stroke terminus.
Is the Airtac SE32 Standard Cylinder SE32X180 the Right Cylinder?
For lower force needs, the adjacent SE25 bore offers a smaller footprint, while stepping up to the SE40 bore provides a higher 628N push at 0.5 MPa. As a standard double-acting cylinder, the SE32X180 will drift if air pressure is lost or the valve centers; applications requiring true position holding should pivot to the BSE rod-lock variant. At 180mm stroke, the 12mm rod and M10x1.25 thread handle moderate side loads, but long unsupported strokes still warrant an external guide rail. Replacement is straightforward: match the 32mm bore, 180mm stroke, PT1/8 port, and your specific mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X180 FAQ
The SE32X180 generates 402N of push force and 345N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563N, with a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X180 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing footprints and reuse standard mounting brackets, provided you match the 32mm bore, 180mm stroke, and PT1/8 porting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X180
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.