Airtac SE32 Standard Cylinder SE32X190
The AirTAC Airtac SE32 Standard Cylinder SE32X190 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke190 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X190
The AirTAC SE32X190 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a 402 N push force at 0.5 MPa. Its square extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 32 mm bore unit travels 190 mm and relies on a field-adjustable pneumatic cushion at both ends to soften end-of-stroke impacts. Because this specific SKU lacks the -S magnet code, it is not equipped for AirTAC CMSE or DMSE position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X190 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X190 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X190
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X190 Is Used
Carton Flap Folding
Provides 402 N of push at 0.5 MPa to reliably fold corrugated carton flaps on continuous packaging lines.
Package Diverting
Uses its 190 mm stroke to push lightweight parcels off a main conveyor belt onto sorting chutes.
Small Part Ejection
Cycles rapidly at 30-800 mm/s to eject molded plastic parts from a 32 mm bore assembly station.
Is the Airtac SE32 Standard Cylinder SE32X190 the Right Cylinder?
Delivering 402 N of push at 0.5 MPa, this 32 mm bore sits at the smallest end of the SE range; if you need less force there is no smaller SE bore, but stepping up to the 40 mm bore yields 628 N. Keep in mind the adjustable air cushion only decelerates the piston near stroke end and does not hold the load if air pressure drops. For a drop-in ISO 15552 retrofit, match the 32 mm bore, 190 mm stroke, PT1/8 port, and your required mounting accessory. Since the 190 mm stroke approaches the mid-range for this bore, ensure your setup handles side loads properly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X190 FAQ
At 0.5 MPa it provides 402 N push and 345 N pull. At 0.7 MPa the push increases to 563 N, and the maximum push is 82 kgf at 1.0 MPa.
Yes, the SE32X190 is dimensionally interchangeable per ISO 15552 standards. You can swap it as a drop-in replacement for other ISO 15552 profile cylinders using the same mounting hardware and PT1/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X190
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.