Airtac SE32 Standard Cylinder SE32X210
The AirTAC Airtac SE32 Standard Cylinder SE32X210 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke210 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X210
The AirTAC SE32X210 is a double-acting, single-rod profile cylinder operating at 402 N push at 0.5 MPa. Built to the ISO 15552 standard, its square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 32 mm bore unit features field-adjustable air cushioning at both ends to soften end-of-stroke impacts. As this specific SKU lacks the -S magnet suffix, it is configured for basic actuation without integrated CMSE or DMSE position sensing.
Airtac SE32 Standard Cylinder SE32X210 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X210 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X210
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X210 Is Used
PCB Drill Spindle Gating
Cycles a pneumatic gate to isolate drill spindles in electronics manufacturing, using the 402 N extend force to overcome light spring resistance within a compact 32 mm footprint.
Blister Pack Film Guide
Tracks and tensions thin polymer film in pharmaceutical packaging lines, where the 210 mm stroke provides just enough linear travel without consuming excessive frame space.
Lab Sample Tray Diverting
Pushes small analytical sample trays into the inspection zone of clinical analyzers, benefiting from the smooth deceleration of the adjustable end cushions to protect delicate vials.
Is the Airtac SE32 Standard Cylinder SE32X210 the Right Cylinder?
Delivering 402 N push at 0.5 MPa, this 32 mm bore is the smallest in the SE range, meaning you can only step up to the 40 mm bore for 628 N if higher force is required. For stroke guidance, the 210 mm travel relies on a 12 mm rod with an M10x1.25 thread; because the stroke is over 300 mm? No, at 210 mm it is moderate, but always ensure side loads are managed by an external guide to prevent rod-bearing bending. It serves as a drop-in replacement for any ISO 15552 cylinder with a 32 mm bore, 210 mm stroke, PT1/8 port, and basic mounting. Note that a plain SE does not hold its load when air pressure is lost; use a BSE rod lock for static holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X210 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The standard operating speed ranges from 30-800 mm/s.
Yes, the SE32X210 is dimensionally interchangeable with any standard ISO 15552 profile cylinder of the same bore and stroke. This specific SKU does not include a position sensing magnet (no -S suffix), so it cannot host AirTAC CMSE or DMSE sensors without modifying the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.