Airtac SE32 Standard Cylinder SE32X225
The AirTAC Airtac SE32 Standard Cylinder SE32X225 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke225 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X225
The AirTAC SE32X225 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics, delivering a 402 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames. Because this 225 mm stroke is non-standard, it is produced as a made-to-order unit to fit your exact linear motion requirements.
This model features field-adjustable air cushioning at both ends to soften end-of-stroke impacts, operating at speeds of 30-800 mm/s. Note that this specific SKU is supplied without a piston magnet, meaning it cannot host CMSE or DMSE electronic position sensors without modification. If position feedback is required for your automation sequence, an external mechanical limit switch must be used.
Airtac SE32 Standard Cylinder SE32X225 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X225 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X225
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X225 Is Used
PCB Drill Spindle Gating
Cycles small linear gates in electronics manufacturing, using the 402 N extend force to position fiberboard panels without overwhelming delicate tooling.
Blister Pack Film Advance
Actuates a 225 mm stroke indexing arm to feed polymer film into sealing dies, relying on the smooth tie-rod-free profile to prevent film snagging.
Lab Sample Dispenser
Drives a 225 mm vertical plunge to lower pipette arrays into reagent trays, where the adjustable pneumatic cushion prevents liquid splashing at the stroke end.
Is the Airtac SE32 Standard Cylinder SE32X225 the Right Cylinder?
When sizing this 32 mm bore, consider stepping up to the 40 mm variant if your load requires more force, as the 40 mm bore provides a 628 N push at 0.5 MPa compared to this model's 402 N. Conversely, if you are oversizing and need a smaller footprint, the 32 mm is the smallest standard SE bore available. For this 225 mm stroke, the 12 mm rod and M10x1.25 thread provide a robust interface, but because the stroke exceeds 300 mm in larger variants, always verify side-load limits; here, an external guide is recommended if the load is not perfectly axial. As a true ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, sharing standard mounting accessories like FA front flanges or LB foot brackets, and utilizing a PT1/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X225 FAQ
At 0.5 MPa, the SE32X225 provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf when operated at the 1.0 MPa pressure limit.
This specific SKU does not include a built-in magnet (-S code), so it cannot directly support AirTAC CMSE reed or DMSE electronic sensors. You would need to select an SE32X225S variant for internal position sensing, or use an external mechanical switch.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.