Airtac SE32 Standard Cylinder SE32X230
The AirTAC Airtac SE32 Standard Cylinder SE32X230 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke230 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X230
The AirTAC SE32X230 is a double-acting single-rod profile cylinder built to the ISO 15552 standard. Delivering 402 N of push force at 0.5 MPa, it uses a square extruded aluminum barrel without external tie rods. This clean-profile design resists corrosion and mounts flush against machine frames, saving valuable space in compact assemblies.
This SKU is configured without a sensor magnet and uses a PT1/8 port with a 12 mm hard-chrome rod. The field-adjustable air cushioning at both ends allows you to dial in the deceleration screw to soften hard end stops during high-speed cycling. It is dimensionally interchangeable with other ISO 15552 cylinders, ensuring a seamless retrofit.
Airtac SE32 Standard Cylinder SE32X230 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X230 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X230
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X230 Is Used
PCB Drill Bit Changer
Cycles a tool carousel in an electronics fabrication cell, using the 230 mm stroke to index carbide drill bits into the spindle with precise 402 N extension force.
Carton Flap Folder
Actuates a mechanical arm on a packaging line to tuck corrugated flaps, relying on the adjustable end cushions to prevent harsh impacts at 800 mm/s.
Lab Sample Dispenser
Pushes a pneumatic syringe in an automated analyzer, where the flush extruded barrel profile allows easy mounting within a tight diagnostic enclosure.
Is the Airtac SE32 Standard Cylinder SE32X230 the Right Cylinder?
Stepping up to the 40 mm bore increases the 0.5 MPa push force to 628 N, whereas dropping below 32 mm exits the standard ISO 15552 size range, making this the most compact option available. Because this 230 mm stroke exceeds 300 mm, it approaches the threshold where side loading induces rod-bearing bending; always support the load with an external guide to prevent premature seal wear. As a double-acting cylinder, it cannot hold a load when air pressure is lost—add a BSE rod lock if the application requires safety holding. It serves as a direct drop-in replacement for any ISO 15552 cylinder matching the 32 mm bore, 230 mm stroke, and basic mounting footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X230 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push capacity is 82 kgf when operated at the 1.0 MPa pressure limit.
This specific SE32X230 SKU is built without a magnet, so it cannot host CMSE or DMSE position sensors. If your application requires end-of-stroke detection, select the SE32X230S variant with the built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X230
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.