Airtac SE32 Standard Cylinder SE32X240
The AirTAC Airtac SE32 Standard Cylinder SE32X240 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke240 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X240
The AirTAC SE32X240 is a double-acting, single-rod ISO 15552 profile cylinder delivering a 402 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 32 mm bore unit features field-adjustable air cushioning at both ends to decelerate the piston smoothly over its 240 mm stroke. Because this SKU lacks the -S magnet option, it is not equipped for CMSE or DMSE position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X240 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X240 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X240
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X240 Is Used
PCB Router Gantry
Drives a light-duty pick-and-place gantry on a PCB depaneling router, where the 402 N push force easily shifts board stacks along the 240 mm travel.
Carton Flap Folder
Folds small corrugated carton flaps on a continuous packaging line, benefiting from the flush no-tie-rod profile to avoid snagging passing boxes.
Lab Sample Dispenser
Actuates a 240 mm travel gating mechanism for vial sorting in laboratory automation, relying on adjustable end cushions to prevent harsh stops.
Is the Airtac SE32 Standard Cylinder SE32X240 the Right Cylinder?
At 402 N push, this bore fits light-duty tasks; stepping up to the 40 mm bore yields 628 N push, while dropping to a smaller bore is not an option as 32 mm is the smallest standard SE size. If your process requires holding a load when air pressure is lost, note that a plain SE cylinder will drift and you must specify a BSE rod lock variant.
For this 240 mm stroke, the 12 mm rod and M10x1.25 thread handle moderate side loads, but long unsupported strokes still risk rod-bearing bending and should use an external guide. It serves as a dimensionally interchangeable drop-in replacement for any ISO 15552 cylinder, using standard mounting hardware and a PT1/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X240 FAQ
The SE32X240 generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum of 82 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders using standard mounting accessories. It uses a PT1/8 port and adjustable air cushions at both ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X240
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.