Airtac SE32 Standard Cylinder SE32X240SFTC
The AirTAC Airtac SE32 Standard Cylinder SE32X240SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke240 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X240SFTC
The AirTAC SE32X240SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, medium-duty pneumatics. Generating 402 N of push force at 0.5 MPa, it uses a 12 mm hard-chrome rod and a PT1/8 port to efficiently drive lighter loads over a 240 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from snagging.
This specific configuration includes a built-in magnet for non-contact position sensing, seamlessly supporting AirTAC CMSE reed and DMSE electronic switches within its three-side sensor groove. An FTC center trunnion mount provides a pivoting axis ideal for articulating mechanisms, while the field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration and eliminate hard metal impacts during high-speed cycling.
Airtac SE32 Standard Cylinder SE32X240SFTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X240SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X240SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X240SFTC Is Used
Textile Loom Tensioning
Utilizes the 240 mm stroke and FTC pivot mount to articulate tensioner arms on weaving looms, maintaining precise fabric tension with 402 N of push force.
Lab Sample Diverting
Leverages the built-in magnet with DMSE electronic sensors to confirm paddle positions on conveyor sample diverters, routing vials at speeds up to 800 mm/s.
Small Part Ejection
Deploys the 32 mm bore compact profile to eject molded plastic parts from low-tonnage presses, using adjustable cushioning to soften the 27 mm cushion stroke.
Is the Airtac SE32 Standard Cylinder SE32X240SFTC the Right Cylinder?
Selecting the 32 mm bore is optimal when your application requires 402 N of push at 0.5 MPa. If your assembly needs less force and faster cycling, stepping down to the 25 mm bore yields 246 N of push, whereas moving up to the 40 mm bore provides 628 N for heavier resistance. Because this is a 240 mm stroke, the unsupported piston rod is susceptible to bending under lateral loads; always incorporate an external guide rail to prevent rod-bearing wear and premature seal failure.
The FTC trunnion mount accommodates angular misalignment along a fixed pivot point, but remember that a standard double-acting cylinder cannot hold a load in place if air pressure drops or the directional valve centers—the piston will drift. For any position-holding safety requirements, pair this cylinder with an external pilot-operated check valve or transition to the AirTAC BSE rod-lock series. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for competing standard profile cylinders without requiring custom mounting brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X240SFTC FAQ
The 32 mm bore provides 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, features a PT1/8 port, and achieves speeds of 30-800 mm/s.
Yes, its standardized ISO 15552 / VDMA 24562 mounting dimensions allow it to serve as a drop-in dimensional replacement for other profile cylinders. However, it cannot hold a load unpowered; the adjustable air cushion only decelerates the piston near stroke end and does not function as a mechanical brake or lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X240SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.