Airtac SE32 Standard Cylinder SE32X25FA
The AirTAC Airtac SE32 Standard Cylinder SE32X25FA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X25FA
The AirTAC SE32X25FA is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a 402 N push force at 0.5 MPa. Its 25 mm stroke makes it highly effective for short, rapid positioning tasks. The extruded aluminum barrel design omits external tie rods, yielding a compact body that resists corrosion and mounts flush against machine frames.
This front flange (FA) unit features field-adjustable air cushioning at both ends to soften end-of-stroke impacts, operating at speeds of 30-800 mm/s. Note that this specific SKU is configured without a piston magnet, meaning it is not ready for CMSE or DMSE electronic position sensing out of the box.
Airtac SE32 Standard Cylinder SE32X25FA Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X25FA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X25FA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X25FA Is Used
Ejector Pin Actuation
Uses the 25 mm stroke and 402 N push to quickly eject small molded plastic parts from a fixture, leveraging the FA flange to mount directly onto the press face.
Small Carton Flap Folding
Deploys the short stroke to tuck end flaps on compact packaging lines, where the adjustable cushion absorbs the hard stop at high cycling speeds.
Lab Sample Diverting
Pushes lightweight sample tubes into analysis chutes, benefiting from the tie-rod-free extruded profile that prevents dust buildup in clean laboratory environments.
Is the Airtac SE32 Standard Cylinder SE32X25FA the Right Cylinder?
Selecting this 32 mm bore provides 402 N push at 0.5 MPa, fitting compact actuation needs. If your application requires less force, you must drop down to a smaller non-ISO bore, but if you need more power, stepping up to the 40 mm bore yields 628 N push. This SE32X25FA ships with a front flange (FA) mount and PT1/8 ports. Because it lacks a piston magnet, you cannot mount reed or solid-state sensors directly to it; if position feedback is required, specify an SE32X25FAS instead.
As a standard double-acting cylinder, this model will not hold a load if air pressure is lost or the valve is centered—the piston will drift. For vertical loads requiring safety holding, consider a BSE rod lock variant. Being dimensionally interchangeable per ISO 15552, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders without altering mounting footprints.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X25FA FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE32X25FA is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting interface and front flange (FA) footprint as other standard ISO 15552 profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X25FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.