Airtac SE32 Standard Cylinder SE32X25FTC
The AirTAC Airtac SE32 Standard Cylinder SE32X25FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X25FTC
The AirTAC SE32X25FTC is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke actuation. Operating at 0.5 MPa, it generates 402 N of push force and 345 N of pull force. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This FTC-mounted unit features field-adjustable pneumatic cushioning at both ends to soften end-of-stroke impacts. Because this specific SKU lacks the -S magnet suffix, it is not equipped for CMSE or DMSE position sensing out of the box. The 27 mm cushion length and PT1/8 porting are scaled specifically for this 32 mm bore class.
Airtac SE32 Standard Cylinder SE32X25FTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X25FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X25FTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X25FTC Is Used
PCB Ejector Pins
Provides 402 N of push at 0.5 MPa to eject printed circuit boards from test fixtures without damaging delicate traces.
Small Carton Flaps
Uses its 25 mm stroke to tuck minor flaps on small packaging lines, fitting neatly into compact folding modules.
Lab Dispenser Valves
Actuates precision metering valves for chemical dispensing, where the FTC mount secures the cylinder against lateral shifting.
Is the Airtac SE32 Standard Cylinder SE32X25FTC the Right Cylinder?
Selecting the SE32X25FTC is ideal when you need precise 25 mm movements in tight spaces. If your application requires less force, there is no smaller standard ISO 15552 bore, making 32 mm the baseline. If you need to step up, the next size is the 40 mm bore, which provides 628 N of push at 0.5 MPa. This model uses an FTC mounting accessory and PT1/8 tapered ports.
Remember that a standard double-acting cylinder cannot hold a load in place if air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, consider a BSE rod-lock variant or an external pilot-operated check valve. Since this SKU lacks the -S magnet, you cannot track piston position without modifying the assembly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X25FTC FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
Yes, the SE32X25FTC is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with matching FTC mounting accessories and PT1/8 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X25FTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.