Airtac SE32 Standard Cylinder SE32X25SCB
The AirTAC Airtac SE32 Standard Cylinder SE32X25SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X25SCB
The AirTAC SE32X25SCB is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. Operating at 0.5 MPa, it delivers 402 N of push force and 345 N of pull force. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts neatly into tight machinery envelopes.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The CB double clevis mounting accessory accommodates pivoting loads, while the field-adjustable air cushion at both ends lets you fine-tune deceleration to soften hard mechanical stops.
Airtac SE32 Standard Cylinder SE32X25SCB Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X25SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X25SCB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X25SCB Is Used
Pouch Sealing Jaws
Drives the short 25 mm closing stroke on continuous vertical pouch sealing jaws, where the 402 N push force securely crimps packaging films.
Diverter Gate Arm
Actuates a short-stroke diverter gate arm on a conveyor belt system, utilizing the CB clevis to accommodate the pivot arc during package sorting.
Small Part Ejector
Ejects small machined aluminum parts from a fixture in precision manufacturing, relying on the compact profile and 345 N retract force to reset quickly.
Is the Airtac SE32 Standard Cylinder SE32X25SCB the Right Cylinder?
If your application requires less force, stepping down is not an option as 32 mm is the smallest standard SE bore. Conversely, if you need greater thrust, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Remember that a plain SE cylinder does not hold its position if air pressure is lost; for load-holding safety, consider the BSE rod lock variant.
This specific configuration includes a CB double clevis mount, a PT1/8 port, and a built-in magnet for CMSE or DMSE sensors. Because the stroke is only 25 mm, side-load stress on the rod bearing is minimal, but always ensure the pivoting clevis alignment is true to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X25SCB FAQ
This 32 mm bore cylinder delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s and features a PT1/8 port.
Yes, the SE32X25SCB is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and rod thread dimensions of comparable profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X25SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.