Airtac SE32 Standard Cylinder SE32X25SFTC
The AirTAC Airtac SE32 Standard Cylinder SE32X25SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X25SFTC
The AirTAC SE32X25S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation, delivering a 402 N push at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine cells.
Equipped with a built-in magnet for CMSE or DMSE position sensing, this 32 mm bore unit integrates an FTC center trunnion accessory. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, protecting internal components during rapid 30-800 mm/s cycles.
Airtac SE32 Standard Cylinder SE32X25SFTC Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X25SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X25SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X25SFTC Is Used
PCB Drill Clamping
Secures delicate printed circuit boards in a drilling spindle fixture, utilizing the 402 N push force and short 25 mm stroke for rapid, precise material positioning.
Lab Dispenser Gate
Actuates a small access door on an automated fluid dispensing machine, where the compact tie-rod-free profile saves valuable space on the crowded laboratory bench.
Carton Flap Folder
Tucks minor flaps on a small-format packaging line, relying on the adjustable end cushions to soften impacts during high-speed 30-800 mm/s cycling.
Is the Airtac SE32 Standard Cylinder SE32X25SFTC the Right Cylinder?
Selecting this 32 mm bore makes sense when a 25 mm stroke requires precise point-to-point movement. If your application demands less force, there is no smaller standard ISO 15552 bore in the SE range, making this the baseline choice. If you need substantially more thrust, stepping up to the 40 mm bore increases your 0.5 MPa push to 628 N. Because the plain SE design lacks a physical lock, the piston will drift if air pressure drops or the valve centers; use an external pilot-operated check valve if you must hold a load safely mid-stroke.
For ISO 15552 retrofit projects, this model maps directly to a 32 mm bore, 25 mm stroke, PT1/8 port, and FTC mounting interface. The included -S magnet enables drop-in compatibility with AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X25SFTC FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes. The SE32X25S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders matching the 32 mm bore, 25 mm stroke, PT1/8 port, and FTC trunnion mounting dimensions without altering your machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X25SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.