Airtac SE32 Standard Cylinder SE32X280S
The AirTAC Airtac SE32 Standard Cylinder SE32X280S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 280mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke280 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X280S
The AirTAC SE32X280S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers 402 N of push force at 0.5 MPa and pulls with 345 N, making it a precise actuator for lighter duty cycles.
This unit features a built-in magnet for CMSE and DMSE position sensing. Its square extruded aluminum barrel removes external tie rods, yielding a flush body that resists corrosion and simplifies mounting in tight machine envelopes.
Airtac SE32 Standard Cylinder SE32X280S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X280S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X280S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X280S Is Used
PCB Router Gantry
Drives a light routing spindle across 280mm of travel, utilizing the 402N push force to maintain cutting position while the compact profile barrel saves Z-axis height.
Carton Flap Folder
Actuates a folding arm on a continuous packaging line, where the adjustable end cushions soften the 280mm stroke to prevent tearing cardboard flaps at high cycle rates.
Lab Sample Dispenser
Positions a fluid nozzle over a multi-well plate, relying on the -S magnet and DMSE electronic sensors to confirm exact sample delivery coordinates.
Is the Airtac SE32 Standard Cylinder SE32X280S the Right Cylinder?
The 32mm bore provides 402 N push at 0.5 MPa; if your assembly requires less force, step down to the 20mm bore, or move up to the 40mm bore for 628 N. Because this is a 280mm stroke, the 12mm rod and bearing face bending stresses under side loads—an external guide rail is strongly recommended to prevent premature wear.
When specifying a replacement, match the 32mm bore, 280mm stroke, PT1/8 port, and the -S magnet requirement. Note that a standard SE cylinder will drift and drop its load if air pressure is lost; for position holding, select a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X280S FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The pneumatic port size is PT1/8.
Yes. The SE32X280S is dimensionally interchangeable per ISO 15552 and VDMA 24562 standards. Its extruded profile barrel lacks external tie rods, meaning it drops directly into standard ISO 15552 mounting hardware without clearance issues.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X280S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.