Airtac SE32 Standard Cylinder SE32X290
The AirTAC Airtac SE32 Standard Cylinder SE32X290 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke290 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X290
The AirTAC SE32X290 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 402 N at 0.5 MPa. Its clean extruded aluminum barrel lacks external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 32 mm bore unit features a 12 mm rod and field-adjustable pneumatic cushioning at both ends to soften end-stop impacts. Because this specific SKU lacks the internal magnet, it does not support CMSE or DMSE electronic position sensing without modification.
Airtac SE32 Standard Cylinder SE32X290 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X290 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X290
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X290 Is Used
PCB Drill Bit Changer
Indexes tool cassettes in CNC routing cells, using the 290 mm stroke to reach secondary tool racks while the 402 N push force securely seats the collet.
Small Parts Diverter Gate
Actuates a routing flap on a packaging conveyor, where the compact tie-rod-free profile clears the tight frame geometry of adjacent belt rollers.
Lab Sample Ejector
Pushes processed test tubes out of a centrifuge carousel, relying on the adjustable end cushions to prevent glass breakage at the end of the 290 mm extension.
Is the Airtac SE32 Standard Cylinder SE32X290 the Right Cylinder?
Choosing this 32 mm bore makes sense when your application requires roughly 402 N of push force at 0.5 MPa. If you need less power, the neighboring smaller ISO 15552 size does not exist in this series, but stepping up to the 40 mm bore yields 628 N of push for heavier loads. As a true ISO 15552 cylinder, it serves as a drop-in replacement for any standard 32 mm bore, 290 mm stroke profile cylinder using the same PT1/8 ports and mounting accessories.
With a 290 mm stroke, the 12 mm piston rod is highly susceptible to bending under lateral stress. Always use an external guide rail to support the load and prevent rod-bearing wear, as the cylinder itself cannot hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X290 FAQ
The SE32X290 provides 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N, and the maximum push force is 82 kgf at 1.0 MPa. This 32 mm bore cylinder uses a PT1/8 port.
No, the SE32X290 is a standard double-acting cylinder and will drift if air pressure is lost. The adjustable air cushions only decelerate the piston near the stroke ends and do not function as a locking mechanism. For position holding, consider a BSE series rod lock cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X290
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.