Airtac SE32 Standard Cylinder SE32X290S
The AirTAC Airtac SE32 Standard Cylinder SE32X290S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke290 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X290S
The AirTAC SE32X290S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It yields 402 N of push force at 0.5 MPa alongside 345 N of pull, operating via a PT1/8 port and a 12 mm hard-chrome rod. Because the extruded aluminum square barrel omits external tie rods, the body resists corrosion and mounts flush against machine frames, freeing up valuable space in tight assemblies.
This 290 mm stroke unit carries the -S magnet code, meaning it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing along its three integrated sensor grooves. You can fine-tune the end-of-stroke deceleration via the field-adjustable air cushioning at both ends, ensuring smooth stops rather than harsh, fixed-bumper impacts.
Airtac SE32 Standard Cylinder SE32X290S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X290S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X290S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X290S Is Used
PCB Depaneling Saw
Drives a circular blade to singulate 290 mm circuit board panels, utilizing the 402 N push force to cleanly sever substrate material without crushing components.
Small Parts Ejector
Kicks molded plastic parts out of a 32 mm bore injection mold cavity, relying on the -S magnet and DMSE sensor to verify ejection completion before the mold closes.
Pouch Diverter Gate
Actuates a lightweight sorting flap to redirect small product pouches, where the adjustable cushion softens the 290 mm stroke end to prevent tearing the packaging film.
Is the Airtac SE32 Standard Cylinder SE32X290S the Right Cylinder?
Stepping down to the SE25 bore is not an ISO 15552 option, so if you need less force, you must switch series entirely; conversely, stepping up to the SE40X290S provides a heavier 628 N push at 0.5 MPa for higher resistance. At 290 mm of travel, the 12 mm rod and M10x1.25 thread face leverage forces, so an external guide is recommended to prevent rod-bearing bending under side loads. Remember that this cylinder relies on live air pressure to move and hold; it will drift if air is lost, so integrate a BSE rod lock if the payload must be held during an e-stop. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement sharing standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X290S FAQ
This 32 mm bore cylinder generates 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum 82 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
No, the SE32X290S is a standard double-acting cylinder and will drift if air pressure is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load. For true position holding, use an AirTAC BSE series rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X290S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.